Rockwell Concrete Company work truck in Fresno, CA

Concrete Contractor in Fresno, CA

Driveways and Patios Built for Fresno Heat

We pour driveways, patios, walkways and slabs across Fresno and the surrounding valley. Every job starts with the base, because that's what decides if the concrete holds up or cracks.

Free Estimates
Licensed & Insured
11 Cities Covered
No-Obligation Quotes
What We Do

Our Services

What we pour, patch and replace around Fresno.

Concrete Driveways

A driveway that can take the weight of your truck without hairline cracking by year two.

Concrete Patios

Patios finished the way you want them, broom, stamped, or exposed aggregate.

Stamped Concrete

The look of pavers or stone without the joints that gather weeds.

Concrete Repair

We fix the cracked slab or the sunken section instead of just patching over it.

Concrete Slabs

Garage, shop, and shed slabs poured to actually carry what you're putting on them.

Concrete Sidewalks & Walkways

Walkways poured to code, sloped so water runs off instead of pooling by your door.

Who We Are

A Fresno Crew That Pours Concrete for a Living

We handle concrete flatwork for homeowners in Fresno and the towns around it, driveways mostly, plus patios, walkways, and the occasional garage slab. Most people call us because something already cracked, sank, or never drained right in the first place. Clay soil out here swells and shrinks with the seasons, and a slab poured on a bad base will show it within a year or two.

We dig out and compact the base before anything gets poured, because that's the part nobody sees and the part that actually matters. We cut control joints the same day we finish the pour, in a pattern that gives the concrete a place to crack instead of letting it pick its own spot. Rebar goes in on chairs, not laid on the dirt, and we don't pour over tree roots without dealing with them first.

10+
Years Experience
500+
Projects Completed
11
Cities Served
More About Us
Rockwell Concrete Company work truck
Licensed & Insured
Estimates are free, always
Where We Work

Serving Fresno, CA

Based in Fresno, out pouring concrete across the valley.

Fresno, CA
Visalia, CA
Clovis, CA
Tulare, CA
Madera, CA
Hanford, CA
Reedley, CA
Selma, CA
Sanger, CA
Kerman, CA
Kingsburg, CA

Not on the list? Give us a call anyway. We are often working nearby.

Why Choose Us

Why people keep calling us back

Most of our work comes from someone telling a neighbor about us. Here is why that keeps happening.

Licensed and Insured

We carry the license and insurance to back the work we do.

Straightforward Quotes

You get a written quote with the mix design and finish spelled out, not a round number over the phone.

On Schedule

We pour on the day we say we will, weather permitting.

Clean Job Sites

We haul off the old concrete and the forms, we don't leave rubble in your yard.

Our Own Crew

The guys who finish your concrete are the same guys who poured it.

Local Experience

We know what Fresno's clay soil and summer heat do to a slab.

Reviews

What people said afterwards

5.0 from 100+ reviews
Our old driveway in Clovis had a crack you could lose a quarter in. New pour looks great and the rebar schedule they explained actually made sense to me.
Maria G.
Concrete Driveways · Visalia, CA
Had to push the pour back three days because of rain, which was annoying, but they called ahead instead of just not showing up. Patio by our place in Sanger turned out solid.
Dave R.
Concrete Patios · Clovis, CA
Sunken slab by our back door in Fresno got lifted with foam instead of torn out. Took half a day and saved us the mess of a full replacement.
Jenny L.
Concrete Repair · Tulare, CA
Common Questions

Questions we get a lot

Questions people usually ask before they ever call us.

How much does a concrete driveway cost in Fresno?
A standard residential concrete driveway cost depends mainly on slab thickness, the PSI strength of the mix, and whether rebar or wire mesh is used for reinforcement. Decorative finishes like stamping or exposed aggregate add cost per square foot over a plain broom finish. Site access and the condition of the existing base also affect price, since a bad base means more excavation before the pour. A written quote after an on-site look is the only way to get an accurate number.
Are you licensed and insured to pour concrete in California?
A licensed concrete contractor in California carries a C-8 Concrete contractor license through the Contractors State License Board, along with general liability insurance. Asking to see the license number and a certificate of insurance before work starts is reasonable on any job. This protects the homeowner if equipment damages a sidewalk, utility line, or landscaping during the pour.
How soon can a concrete project get started?
Start times for concrete work depend on the season, since pouring in extreme summer heat in the Central Valley requires scheduling around the hottest part of the day. Smaller jobs like patio repairs can often be scheduled within a couple of weeks. Larger driveway or foundation pours may take longer due to permit approval and material delivery.
What areas around Fresno get covered?
Concrete contractors based in Fresno typically serve a roughly 50 mile radius, covering towns like Clovis, Visalia, Madera, and Hanford in addition to Fresno itself. Travel distance can affect scheduling for very small jobs. Confirming the service area before requesting a quote avoids a wasted trip for both sides.
Will a small concrete job get taken on, or only big projects?
Many concrete contractors handle small jobs like a single cracked sidewalk panel, a short section of curb, or a small patio extension, not just full driveways and foundations. Small jobs sometimes carry a minimum charge since mobilizing a crew and truck costs the same whether the pour is 20 square feet or 200. Asking directly is better than assuming a job is too small to quote.
What kind of properties do concrete contractors work on?
Concrete contractors generally work on single family homes, rental properties, and small commercial sites like retail pads or parking areas. Residential driveways, patios, and walkways make up most of the day to day work. Larger commercial slabs usually involve different specs and inspection requirements than a typical home job.
How do I get started with a concrete project?
Getting started usually means a phone call or site visit where the contractor looks at the existing slab or bare ground, measures the area, and discusses the finish wanted. A written quote covering the mix design, thickness, and reinforcement should follow. Scheduling after that depends on weather and permit timing if one is required.
What affects the cost of a concrete project the most?
Slab thickness and PSI strength of the mix are the biggest cost drivers in any concrete project, followed by reinforcement type, rebar costs more than wire mesh but holds up better under vehicle weight. Decorative finishes like stamping, coloring, or exposed aggregate add labor and material cost. Site conditions, like a steep grade or poor soil requiring extra excavation, can also push the price up.
Is a deposit required before concrete work starts?
Most concrete contractors require a deposit before ordering materials and scheduling a pour, often a percentage of the total job cost. The remaining balance is typically due on completion once the concrete has cured and the finish is approved. Payment terms should be spelled out in the written quote before work begins.
What happens if it rains on the scheduled pour day?
Concrete can't be poured and finished properly in active rain, since water added to the surface weakens the top layer and ruins the finish. Contractors typically reschedule the pour for the next available dry day rather than risk a bad slab. Plastic sheeting can protect a freshly poured slab from light rain, but a scheduled pour itself has to wait for clear weather.

Contact Info

Call or Text
(559) 576-8948
Hours
Open 7 days, 8am to 8pm

Get a Free Quote

Send us a few details about the job, the size of the area and what's there now, and we'll get back to you with next steps.

Request Sent!

Thanks for reaching out. We'll contact you shortly to discuss your project.

Call (559) 576-8948